1 What are the requirements for exporting masks to Europe?
Currently, the European market is rapidly importing masks from abroad due to a supply shortage. However, if the mask does not have CE certification, the shipment may be detained, inspected and confiscated.
2 So what is CE certification?
CE stands for the French word Conformité Européenne, which means European standard. CE Marking is the official name of CE. CE marking is extremely important, some products must be CE marked to be eligible to be allowed to circulate in Europe. This means that the product is fully recognized to meet the requirements of safety, health and environmental protection of Europe.
Normally CE-labelled products must be manufactured according to standards adopted by CEN, CENELEC and ECSI, and standards published in official journals. Once certified, the manufacturer can stamp the CE mark on the product and export it to Europe.
|Masks that want to be granted CE certification must ensure three main points điểm||Masks manufactured must fulfill the requirements of the European product directive.|
|Respirators must meet recognized harmonized European safety and performance standards.|
|A mask is fit for its purpose and absolutely poses no danger to life or property.|
3 What certification is required to export masks to the US?
FDA stands for Food and Drug Administration, this is the United States Food and Drug Administration. In 1906, the FDA was established with its headquarters in White Oak, Maryland. Accordingly, all products that want to be exported to the US market must have FDA certification. Without FDA certification, the product cannot be exported to the United States and neither can the mask.
|Standard antibacterial masks must meet standards||The mask structure must have 3-4 layers.|
|Green non-woven fabric.|
|There is a filter.|
|There is antibacterial fabric or antibacterial paper.|
|White non-woven fabric.|
4 The standard mask on the market
Currently, with the serious development of the Covid-19 epidemic in the US and European countries, the import demand of these countries is very large. Accordingly, recently, Dony Garment Co., Ltd. has exported more than 10 million masks to the US, France, Germany, UK, Middle East, Saudi Arabia, Nigeria, Singapore, Japan,....
Dony Mask production image for international market
Dony mask 870/QD BYT standard, the product has 3 standard layers, the top layer is water resistant to prevent saliva up to 100%, the middle layer helps prevent dust and the inner layer kills bacteria up to 99.99%. Besides, the product has a breathable, breathable antibacterial fabric design and a good elastic strap that won't cause ear pain when worn.
According to Mr. Pham Quang Anh - Director of Dony Garment Co., Ltd., Dony antibacterial masks use EO gas sterilization after being packaged. Absolutely antibacterial right from the first use. He added, with needle errors on the product is a basic error that many manufacturers make, so he added a standard needle separator so that this error does not happen.
Thus, with more than 275.000 masks produced every day, Dony can contribute to meeting the needs of people at home and abroad. Especially good supply for international markets that are in short supply.
To better understand the optimization of the fabric masks made by Dony, you can watch more at the following video:
From packaging to the quality of Dony antibacterial cloth masks, all must be cared for and strictly controlled. Meet CE and FDA standards, allowing the export of masks to the US and European countries.
Standard certification and test results of Dony Mask for international export.